Specifications

Enviro stains contain no arsenic, lead, or mercury and very low organic solvents that conform to all VOC regulations.

The Enviro stains are applied to any clean, cured concrete surface or concrete overlay surface. Once dried and sealed, the various colours that are applied become a permanent part of the concrete with lasting beauty.

Application Instructions
Clean the concrete surface to make sure it is free of any topical coatings, oil, gr ease or dirt stains.
Apply the stain with an brush, sponge, or plastic sprayer in the color and technique of your choice.
Do not over apply and do not allow to puddle.
Allow floor to dry thoroughly. Drying time will vary accor ding to the surface conditions and humidity.
Apply a sealer to enrich the color and protect the surface.

Coverage Rate
Enviro stain will cover up to 18 square meters per 3.7 litres.

One coat is usually sufficient.